We are nothing after our death. Let us donate our body organs for the poor.

Be not afraid of anything. You will do marvelous work The moment you fear, you are nobody - Swamy Vivekananda

If you think safety is expensive, try an accident... - O.P.Kharbanda

Preventable accidents, if they are not prevented due to our negligence, it is nothing short of a murder - Dr. Sarvepalli Radha Krishna, 2nd President of India

Zero accidents through zero unsafe behaviors. Do not be complacent that there are no accidents. There may be near miss accidents (NMAs). With luck/chance, somebody escaped knowingly or unknown to the person. But, we can't be safe, if we depend upon the luck.

Safety culture is how the organization behaves when no one is watching.

We make No compromise with respect to Morality, Ethics, or Safety. If a design or work practice is perceived to be unsafe, we do not proceed until the issue is resolved. - Mission statement by S&B Engineers & Consultants Ltd. http://www.sbec.com/safety/

Human meat gets least priority - A doctor's comment on accidents

CSB video excerpts from Dr.Trevor Kletz, http://www.youtube.com/watch?v=XQn5fL62KL8

Jun 26, 2012

Fire safety of the buildings

In the aftermath of the fire in Maharashtra's Secretariat building Mantralaya last week, an article appeared in Times of India on 24.06.2012 stating the review of fire safety in all buildings and maintaining the minimum requirements (as per National Building Code) to fight fire. They are,

  1. maintaining atleast 6 m radius around the buildings free space to enable fire tender movement (this is also to be maintained free from trees and vegetation so that any fire involving them will not lead to fire in the building)
  2. have fire detection and alarm system
  3. have fire hydrants, wet riser, hose reel and automatic sprinkler system
  4. have atleast 75,000 liter underground water tank and atleast 10,000 liter terrace tank exclusively for fire fighting
  5. maintain atleast minimum number of (portable) fire extinguishers
  6. have emergency lighting in and around the building
  7. have one single switch in every building (at an easily identifiable and accessible location) to cut off power supply in case of short circuits (obviously this should be located in the main corridor, preferably at the entrance of the building)
  8. have radiant (self luminescent) emergency exit direction markings along the corridor to the nearest exits
  9. not blocking / locking the emergency exits / stairs with unwanted materials
  10. test electrical systems also regularly to avoid overload/short circuit (as for any fire, people immediately show short circuit as the reason)
  11. have CCTV surveillance system
  12. display cautionary boards like do not smoke
  13. remove the waste/scrap every day
  14. test the systems regularly to see and ensure functioning of all fire protection system
  15. have nodal officer in every building responsible for fire safety
  16. conduct drills to all occupants to prepare them in case of any fire mishap
  17. etc
The above guidelines will help in protecting the persons and property from fire mishaps.


http://articles.timesofindia.indiatimes.com/2012-06-24/hyderabad/32392807_1_wet-riser-fire-mishap-detection-and-alarm-system

Jun 25, 2012

A case for adopting inherently safer technologies - Message from Chairman, US Chemical Safety Board

CSB Chairman urged the industry to adopt inherently safer technologies in their processes, by substitution, reduction in inventory, operating at lesser temperatures and pressures and finally going for simpler instead of complex processes.
The main reason why industry is reluctant to change from existing conditions is that it costs money. Further, it requires lot of research and development and again it requires money. Governments too can do their bit in this regard to help the industry financially also by offering tax benefits to those who change their processes for achieving more safety.
The processes which are dangerous now, are approved by the government, when they were setup. These manufacturing facilities paid their taxes over the years to the government. Once, we are aware of the dangers, it is the responsibility of all stake holders, mainly, the industry and government, to contribute for a common cause i.e going for inherently safer technologies. As governments dole out subsidies and tax benefits to newly set up facilities, they can do the same to help the ailing industry (w.r.t safety).
Rafael Moure-Eraso: It's time for government and industry to adopt inherently safer technology  - Op-Ed Commentaries - The Charleston Gazette - West Virginia News and Sports -

LINK

Jun 24, 2012

Character and culture

I was going through a book titled 'Turning Point - Enlightening Essays on Life Part 1' published by Swaminarayan Aksharpith, Ahmedabad. In this book, there is a chapter on Character in which the quotation of Dwight L Mody is stated as 'Character is what you are in the dark'. 
National Petroleum Offshore Authority in its information booklet (A98443, Revision 1, Oct 2009) defined safety culture as 'Safety culture is how the organisation behaves when no one is watching'. From these two statements we can say that safety culture of an organization is the outcome of character of the individuals responsible for running the organization. Individuals makeup the organization and thus organization's culture is defined.
What we are doing in our day to day activities is not new to us. It is routine and we know how to do it safely. Still, we don't for various reasons. Nobody needs to supervise/watch us and tell us how to do a work in a safe manner. One need not tell us to read the established procedure, know the hazards, wear personal protective equipment, and so on. We know. Some of the tasks were known to us by our intuition / common sense. Still we ignore  for quick gains. We may complete a job without getting hurt ourselves or others. But, a day will come when we become victims of our own actions and that day we repent for our actions. 

Two sewage workers die in a sump of 6 feet depth

A worker engaged in routine maintenance of a pump located six feet below in a sump inhaled poisonous hydrogen sulfide gas and collapsed. Another person who tried to rescue the exposed  was overcome, collapsed and died. Shift supervisor who tried to rescue the persons also lost his life. Four others who tried to rescue were also exposed to the poisonous gas.
This incident shows lack of use of self contained breathing apparatus by the workers involved in such jobs and supervision. Whether the work atmosphere is monitored for toxic gases and sufficient ventilation is provided is to be ascertained.  Even if the work is required to be done only for few minutes, people involved should use necessary safety gear, as many think it is a short job and thus don't need self contained breathing apparatus. Rescue procedures in such incidents also need to be planned before start of work so that there will not be any delay to save the lives. It should form part of procedure to inform fire service crew and doctors before taking up any such work that help can be rendered in shortest time possible during any eventuality. 
Though, these procedures are made and followed in industrial establishments, similar procedures should be made compulsory in departments where persons are likely to be exposed to hazardous environment, where person have to work in confined spaces and so on. If somebody has to work at a place which is not meant for regular use, it should be treated as confined space and safety procedures for confined space should be followed.

Jun 22, 2012

Blast and fire in Vizag Steel Plant

In an incident of explosion and resultant fire in Vizag Steel Plant, 16 persons died and  property worth crores of rupees is damaged. It is reported that the incident happened in oxygen plant of the recently commissioned steel melting shop-II during trials. The hot metal from blast furnace will be sent into a mixer where oxygen will be blown at 17 kg/cm2 pressure to remove impurities and then convert into blooms. It is reported that the back pressure caused the explosion.
As per the reports, following are my observations:
  1. Impurities from hot metal will be burnt in the mixer with oxygen.
  2. Operators could not get the oxygen pressure of 17 kg/cm2 and instead they got about 14 kg/cm2.
  3. They tried to admit oxygen at this lower pressure 2-3 times.
  4. While people went closer to the unit to see reasons for low pressure, explosion occurred.
  5. The pipeline for oxygen is of 5 mm thick instead of 10 mm
  6. The oxygen container and associated piping got burst
  7. The fire after explosion led to fire causing injuries/fatalities and property damage
  8. Vehicles flew of about 50 m from the incident site
The above indicate nonavailability or failure of check valve / non-return valve in the connecting line; non-availability or failure of safety relief valve in the oxygen container and or mixer. The back pressure could be due to sudden reaction of impurities like carbon, etc with more oxygen supplied (2-3 times as low pressure was there) and the reaction product gases could have builtup pressure and non-venting of these gases as they are formed could have led to pressure buildup and back pressure.
As the plant is being commissioned/started for trial runs, many people including top level management was present and so many people thus got exposed.
Why so many vehicles including autorikshaws and scooters were available near the site is not known.

Jun 4, 2012

Operators are important for safety

In an article in Times of India today, an air safety consultant (former member of NTSB) John Goglia said that 80% airline accidents can be attributed to pilots, 40% to maintenance problems. He also suggested to have fatigue management system for efficient job performance like environment management system for improving environmental performance.
We may say that in any activity, the person actually doing the job is an important person and thus his knowledge, skill and interpretation/analysis of data he sees/receives in his job is most important. With poor control on operators regarding their punctuality and discipline, operators already in place may be forced to continue till reliever comes and this may lead to fatigue and errors in his judgement.
Proper selection of the man-power, training, establishing safety procedures, planning of shift duties, procedures for intimation about absence/change of timing well in advance can handle such issues and help in smooth operation of plant.

Jun 1, 2012

Gas cylinder safety

Following link is about BOC guidelines for gas cylinder safety.

http://www.uq.edu.au/ohs/pdfs/OHYG-BOCGasCylinderSafety.pdf

Location of transformers closer to buildings, walkways - a hazard

In an article, it is reported that many transformers located adjacent to foot paths or closer to buildings though as per Petroleum Act, atleast 9 m gap should be maintained. As per Indian Electricity Act, at least 2.5 m vertical and 1.5 m horizontal clearance should be maintained for 11 kv lines which is hardly followed. Read the full information in the following link.

http://timesofindia.indiatimes.com/city/hyderabad/Transformers-buildings-too-close-for-comfort/articleshow/13678673.cms

Wrong chemical mixing - gas leak - 11 injured

In an incident, the truck driver connected connected a wrong hose pumping acid into a tanker already containing some caustic solution. This resulted in chemical reaction, raising the temperature to 120 deg C and the driver saw yellow gas leak. 11 persons were injured in the incident. It is not clear who cleared the tanker driver to connect a wrong hose.

Following procedures/precautions can avoid such chemcial accidents/incidents.
  1. Ensure the fitness of the vehicles by checking for valid certificates before permitting the vehicle into premises.
  2. Ensure the contents and volume in the tanker by checking the records from the driver.
  3. Ensure the availability of TREM card for the chemical in the tanker.
  4. Ensure supervision for the job.
  5. Label the hoses with chemical names apart from proper colour coding of the hoses.
  6. Ensure connecting of earthing lines (depending on the chemicals handled) to the tanker.
  7. Ensure connecting of correct hose to the tanker.
  8. Instruct the operator to pump required volume by proper setting.
  9. After pumping, disconnect and wait for backflow of chemicals from hoses, if any and wash the area.
  10. Disconnect the earthing connections from the tanker.
  11. Enter the volume pumped  or the level in the tank after pumping, in the records of the truck driver.
http://www.kval.com/news/local/At-least-three-people-injured-during-hazardous-materials-incident-Portland-155757555.html

A video is also available in the above link about the incident.

Treatment to blindness caused by chemicals

An eye hospital in Hyderabad, L.V.Prasad Eye Institute, is restoring the blindness to persons caused during chemical accidents. A person lost his eye sight due to splashing of sodium hydroxide. By growing stem cells in the lab, a technique developed by Italian scientists and improvised by scientists in this institute, the doctors are able to restore the eye sight in quick time.
http://www.theworld.org/2012/05/stem-cells-india/

Workers may be complacent not to wear goggles while working with chemicals, assuming that the job is simple or short time job. Chemicals, particularly alkalies can cause retina damage when fall into eyes and not washed immediately and treated. Some workers wash with water for few minutes until they feel better instead of the recommended time period of atleast 15 minutes. Later these people develop complications and may risk their eye sight. One has to wash 15 minutes atleast because, studies say, even after this much period of washing, only about 95% of the chemical is washed and this should be followed with treatment/consultation from the doctor. Any neglect will prove costly.

Featured Post

Reduced my weight from 96 to 76 kg and tummy from 38-40 to 34-35 inches in about 9 months

I am working in the safety department of a government organization. As a part of the job, I used to go around and interact with person...